| 序号 | 论文题目 | 作者 | 期刊(会议) | 年, 卷, 期：起-止页码 |
| 1 | Low-temperature chemical vapor deposition growth of graphene from toluene on electropolished copper foils | B. Zhang, W.H. Lee, R. Piner, I. Kholmanov, Y.P. Wu, H.F. Li, H.X. Ji, R.S. Ruoff | ACS Nano | 2012, 6: 2471-2476 |
| 2 | Flexible pillared graphene paper electrodes for high performance electrochemical supercapacitors | G.K. Wang, X. Sun, F.Y. Lu, H.T. Sun, M.P. Yu, W.L. Jiang, C.S. Liu, J. Lian | Small | 2012, 8: 452–459 |
| 3 | Partitioned cooperative self-assembly process: taking the mesopore swelling strategy one step further for the preparation of mesocellular foams | W. Wang, W.J. Shan, X.Y. Yue, H.Q. Ru | J. Mater. Chem. | 2012, 22: 3462-3470 |
| 4 | Hydrophobic precipitation of carbonaceous spheres from fructose by a hydrothermal process | M. Zhang, H.Yang, Y. N. Liu, X. D. Sun, D. K. Zhang | Carbon | 2012, 50: 2155-2161 |
| 5 | Fabrication of large-area, high-enhancement SERS substrates with tunable interparticle spacing and application in identifying microorganisms at the single cell level | J. Chen, B. Shen, G.W. Qin, X.W. Hu, L.H. Qian, Z.W. Wang, S. Li, Y.P. Ren, L. Zuo | J. Phys. Chem. C | 2012, 116: 3320-3328 |
| 6 | Microstructure and magnetocaloric effect of melt-spun Ni52Mn26Ga22 ribbon | Z.B. Li, J.L. Sanchez Llamazares, C.F. Sanchez-Valdes, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo | Appl. Phy. Lett. | 2012, 100: 174102 |
| 7 | Oscillation of the magnetic moment in modulated martensites in Ni2MnGa studied by ab initio calculations | N. Xu, J.M. Raulot, Z.B. Li, J. Bai, Y.D. Zhang, X. Zhao, L. Zuo, C. Esling | Appl. Phy. Lett. | 2012, 100: 084106 |
| 8 | The effects of Gd3+ substitution on the crystal structure, site symmetry, and photoluminescence of Y/Eu layered rare-earth hydroxide (LRH) nanoplate | X.L. Wu, J.G. Li, Q. Zhu, J.K. Li, R. Ma, T. Sasaki, X.D. Li, X.D. Sun, Y. Sakka | Dalton Trans. | 2012, 41: 1854-1861 |
| 9 | Orientation dependence of shear banding in face-centered-cubic single crystals | N. Jia, F. Roters, P. Eisenlohr, D. Raabe, X. Zhao | Acta Mater. | 2012, 60: 3415-3434 |
| 10 | Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass | N. Jia, F. Roters, P. Eisenlohr, C. Kords, D. Raabe | Acta Mater. | 2012, 60: 1099-1115 |
| 11 | Effective lattice stabilization of gadolinium aluminate garnet (GdAG) via Lu3+ doping and the development of highly efficient (Gd,Lu)AG:Eu3+ red phosphors | J.K. Li, J.G. Li, Z.J. Zhang, X.L. Wu, S.H. Liu, X.D .Li, X.D .Sun, Y. Sakka | Sci. Techol. Adv. Mater. | 2012, 3: 035007 |
| 12 | Improvement in fatigue strength while keeping low Young's modulus of a β-type titanium alloy through yttrium oxide dispersion | X. Song, M. Niinomi, M. Nakai, H. Tsutsumi, L. Wang | Mater. Sci. Eng. C | 2012, 32: 542-549 |
| 13 | Effect of N on microstructure and mechanical properties of 16Cr5Ni1Mo martensitic stainless steel | X.P. Ma, L.J. Wang, B. Qin, C.M. Liu, S.V. Subramanian | Mater. Design | 2012, 34: 74-81 |
| 14 | Re-determination of γ/(γ+α-Mg) phase boundary and experimental evidence of R intermetallic compound existing at lower temperatures in the Mg-Al binary system | Y.P. Ren, G.W. Qin, S. Li, Y. Guo, X.L. Shu, L.B. Dong, H.H. Liu, B. Zhang | J. Alloys Compd. | 2012, 540: 210-214 |
| 15 | Gadolinium aluminate garnet (Gd3Al5O12): Crystal structure stabilization via lutetium doping and properties of the (Gd1-xLux)3Al5O12 solid solutions (x=0-0.5) | J.K. Li, J.G. Li, Z.J. Zhang, X.L. Wu, S.H. Liu, X.D .Li, .X.D .Sun, Y. Sakka | J. Am. Ceram. Soc. | 2012, 95: 931-936 |
| 16 | Controlled synthesis of MnSn(OH)6/graphene nano-composites and their electrochemical properties as capacitive materials | G.K. Wang, X. Sun, F.Y. Lu, Q.K. Yu, C.S. Liu, J. Lian | J. Solid Sta. Chem. | 2012, 185: 172-179 |
| 17 | Well-defined crystallites autoclaved from the nitrate/NH4OH reaction systemas the precursor for (Y,Eu)2O3 red phosphor: Crystallization mechanism,phase and morphology control, and luminescent property | Q. Zhu, J.G. Li, R.Z. Ma, T. Sasaki, X.J. Yang, X.D. Li, X.D. Sun, Y. Sakka | J. Solid Sta. Chem. | 2012, 192: 229-23 |
| 18 | Twinning and martensite in a 304 austenitic stainless steel | Y.F. Shen, X.X. Li, X. Sun,Y.D. Wang, L. Zuo | Mater. Sci. Eng. A | 2012, 552: 514-522 |
| 19 | Effect of pre-annealing treatment on the compressive deformation and damage | Q.W. Jiang, X.W. Li | Mater. Sci. Eng. A | 2012, 546: 59-67 |
| behavior of ultrafine-grained copper | ||||
| 20 | Microstructure and properties of 3Cr5Ni1Mo0.025Nb0,09V0.06N super martensitic stainless steel | X.P. Ma, L.J. Wang, C.M. Liu, S.V. Subramanian | Mater. Sci. Eng. A | 2012, 539: 271-279 |
| 21 | Carbon-content dependent effect of magnetic field on austenitic decomposition of steels | X.X. Zhang, S.J. Wang, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo | J. Magn. Magn. Mater. | 2012, 324: 1385-1390 |
| 22 | Pressureless sintered SiC matrix toughened by in situ synthesized TiB2: Process conditions and fracture toughness | W. Wang, J.B. Lian, H.Q. Ru | Ceram. Inter. | 2012, 38: 2079-2085 |
| 23 | Plastic deformation in an amorphous Ni-P coating | Y.F. Shen, W.N. Liu, X. Sun, W.Y. Xue, Y.D. Wang, L. Zuo, P.K. Liaw | Metall. Mater. Trans. A | 2012, 43: 1610-1620 |
| 24 | Effects of thermal exposure on cyclic deformation and fracture behavior of Ti600 titanium alloy | T. Yu, L. Wang, Y.Q. Zhao, Y. Liu | Inter. J. Fatigue | 2012, 35: 31-36 |
| 25 | Synthesis of Ni-P-PTFE-nano-Al2O3 composite plating coating on 45 steel by electroless plating. | S.Y. Chen, Y. Shi, H. Fan, J. Liang, C.S. Liu, K. Sun | J. Composi. Mater. | 2012, 46: 1405-1416 |
| 26 | Preparation of transparent Y2O3 ceramic by slip casting and vacuum sintering | D. Huo, Y.C. Zheng, X.D. Sun, X.D. Li, S.H. Liu | J. Rare Earths | 2012, 30: 57-62 |
| 27 | Surface energy and work of adhesion of Titania- related materials | Z. Lin, D.C. Ba, C.M. Liu | Phys. Procedia | 2012, 32: 580-589 |
| 28 | First principles calculation on thermal stability of metastable precipitates in Mg-Gd binary alloys | X.Y. Meng, X.H. Wen, Y.P. Ren, G.W. Qin | Mater. Sci. Technol. | 2012, 28: 794-798 |
| 29 | Thermodynamic assessment of Au−Pt system | X.N. Xu, Y.P. Ren, C.F. Li, S. Li, G.W. Qin | Trans. Nonf. Met. Soc. China | 2012, 22: 1432-1436 |
| 30 | Phase equilibria of Mg-rich corner in Mg-Zn-Al ternary system at 300℃ | Y.P. Ren, G.W. Qin, W.L. Pei, S. Li, Y. Gou, H.D. Zhao | Trans. Nonf. Met. Soc. China | 2012, 22: 241-245 |
| 31 | High magnetic field influence on the Widmanstätten transformation in high purity Fe-0.36 wt% C alloy | S.J. Wang, X. Zhao, N. Xiao, L. Zuo | J. Mater. Sci. Technol. | 2012, 28: 552-557 |
| 32 | Microstructure evolution and properties of Mg-3Sn-1Mn(wt%) alloy trip processed by semisolid rheo-rolling | R.G. Guan, Z.Y. Zhao, H. Zhang, C. Lian, C.S. Lee, C.M. Liu | J. Mater. Proc. Technol. | 2012, 212: 1430-1436 |
| 33 | Effects of pulse current on dynamic recrystallization behavior of GH4169 superalloy | Y. Liu, L. Wang, H.H. Liu, X.D. Lu, B.J. Zhang | Mater. Trans. | 2012, 53: 1400-1404 |
| 34 | Assessment of Co-Cr-Ni ternary system by CALPHAD technique | S.Y. Yang, M. Jiang, H.X. Li, L. Wang, S.Y. Yang | Rare Metals | 2012, 31: 75-80 |
| 35 | The effects of Y3+ doping on the phase structure and photoluminescence properties of (Gd0.95-xYxEu0.05)2O3 red phosphors | Q. Zhu, J.G. Li, R. Ma, T. Sasaki, X.J. Yang, X.D. Li, X.D. Sun, Y. Sakka | Mater. Technol. | 2012, 27: 116-117 |
| 36 | Effect of ECAP on high temperature | Q.W. Jiang, Y. Wang, Y. Wu, X.W. Li | Mater. Technol. | 2012, 27: 58-61 |
| compressive deformation behaviour | ||||
| of LY12 aluminium alloys | ||||
| 37 | Effect of sintering temperature on structure | X.W. Li, X. Zhang, P.L. Zhang, H. Yasuda, Y. Umakoshi | Mater. Technol. | 2012, 27: 46-48 |
| and bioactivity of HAp–5.0 wt-%SiO2 | ||||
| bioceramic composites | ||||
| 38 | Qualitative and quantitative characterizations of fracture surfaces of AL6XN super-austenitic stainless steel fatigued at different stress amplitudes | J.G. Yun, C.Q. Ma, J.J. Yi, X.W. Li | Progress in Natur. Sci.: Mater. Inter. | 2012, 22: 48-52 |
| 39 | Effect of strip size on neutral angle during a novel semisolid shearing-rolling process | R.G. Guo, Z.Y. Zhao, R.Z. Chao, Q.S. Zhang, C.M. Liu | Adv. Mater. Res. | 2012, 446-449: 216-219 |
| 40 | Microstructure formation mechanism of AZ31 magnesium alloy processed by rheo-forming | R.G. Guo, Z.Y. Zhao, L. Chao, R.Z. Chao, C.M. Liu | Adv. Mater. Res. | 2012, 490-495: 3319-3322 |
| 41 | Melt follow type and physical model of semisolid rheo-casting process by cooling sloping plate | R.G. Guo, Z.Y. Zhao, L. Chao, R.Z. Chao, C.M. Liu | Adv. Mater. Res. | 2012, 490-495: 3237-3241 |
| 42 | Effects of technical parameters on process stability and microstructure during continuous rheo- extrusion process of 6201 alloy wire | R.G. Guo, Z.Y. Zhao, L. Chao, R.Z. Chao, C.M. Liu | Adv. Mater. Res. | 2012, 503-504: 219-222 |
| 43 | Primary recrystallization texture in rolled (Fe81Ga19)99B1 sheet | Z.H. He, D.Y. Su, Y.H. Sha, F. Zhang, L. Zuo | Adv. Mater. Res. | 2012, 535-537: 772-775 |
| 44 | Effects of normalizing annealing on the recrystallization texture of 4.2wt.%Si non-oriented electrical steel thin sheets | J.L. Liu, Y.H. Sha, Y.C. Yao, F. Zhang, L. Zuo | Adv. Mater. Res. | 2012, 535-537: 615-619 |
| 45 | Study on the mechanical performance of a Ni-based superalloy with trace rare earth element La additions | X. Song, L. Wang, Y. Liu, H.P. Ma | Adv. Mater. Res. | 2012, 509: 177-181 |
| 46 | Effect of pulse current on tensile deformation behavior of IN718 alloy | Y. Liu, L. Wang, F. Feng, X.D. Lu, B.J. Zhang | Adv. Mater. Res. | 2012, 509: 56-63 |
| 47 | Dynamic tensile characteristics of DP600 steel sheets for automotive applications | D.Y. Dong, Y. Liu, L. Wang, C.S. Liu | Adv. Mater. Res. | 2012, 509: 40-45 |
| 48 | Texture evolution in non-oriented silicon steel processed by twin-roll casting | W. Pei, Y.H. Sha, F. Zhang, L. Zuo | Adv. Mater. Res. | 2012, 452-453: 7-11 |
| 49 | Effect of electric field treatment on vacancy of Inconel 718 superalloy at 1073K | Y. Wang, L. Wang, X.Y. Zhang, Y.L. Li, Y. Liu, Y.S. Chao | Adv. Mater. Res. | 2012, 409: 769-773 |
| 50 | Effects of a high magnetic field on abnormal microstructure in Fe-1.1C (wt.%) alloy | M.L. Gong, F.F. Liu, X. Zhao, L. Zuo | Adv. Mater. Res. | 2012, 496: 467-471 |
| 51 | Plasma nitriding of 20CrMo steel with nanostructured surface layer | J. Sun, J. Zhang, W.P. Tong, L. Zuo, J.C. He | Adv. Mater. Res. | 2012, 472-475: 30-34 |
| 52 | Corrosion behavior of new weathering steel in the environment simulating coastal industrial atmosphere | W.F. Cui, C.J. Shao, C.M. Liu | Adv. Mater. Res. | 2012, 479-481: 322-326 |
| 53 | Effect of electric field strength on texture evolution of IF steel sheet during annealing | C.S. He, X. Zhao, W.P. Tong, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 2617-2621 |
| 54 | Effects of magnetic field intensity on carbon diffusion in pure iron in the single-phase austenite region | Y. Wu, Y. Lu, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 2372-2377 |
| 55 | Effect of electric current direction on texture evolution in a cold rolled Fe-3%Si steel under electric current pulses treatment | X.L. Wang, H.M. Zhao, W.B. Dai, X. Zhao | Mater. Sci. Forum | 2012, 706-709: 2366-2371 |
| 56 | Application of EBSD to the crystallographic investigation on Ni-Mn-Ga alloys | Z.B. Li, Y.D. Zhang, C. Esling, H. Yang, J.J. Wang, C.S. He, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 1879-1884 |
| 57 | Flow behavior of Fe-3%Si steel at high temperatures and strain rates | F.H. An, Y.H. Sha, F. Zhang, L. Zuo | Mater. Sci. Forum | 2012, 704-705: 928-934 |
| 58 | Epitaxial growth of α-Fe2O3 thin films on c-plane sapphire substrate by hydrothermal method | S. Li, G.W. Qin, L. Zou | Mater. Sci. Forum | 2012, 702-703: 999-1002 |
| 59 | Effects of a high magnetic field on austenite decomposition in high purity Fe-1.1C (wt.%) alloy | X.X. Zhang, Y.D. Zhang, M.L. Gong, C. Esling, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 60-63 |
| 60 | Texture evolution along the layer thickness in a Fe-3%Si steel under electropulsing treatment | X.L. Wang, H.M. Zhao, W.B. Dai, X. Zhao | Mater. Sci. Forum | 2012, 702-703: 943-946 |
| 61 | Through thickness shear strain in silicon steel under asymmetric rolling | H.P. Yang, Y.H. Sha, F. Zhang, W. Pei, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 762-765 |
| 62 | New model for twin-variant selection in hexagonal alloys | C. Schuman, L. Bao, J.S. Lecomte, M.J. Philippe, Y.D. Zhang, X. Zhao, L. Zuo, J.M. Raulot, C. Esling | Mater. Sci. Forum | 2012, 702-703: 229-232 |
| 63 | Texture and correlation between R-value and formability of aluminum alloy sheet | N. Tian, G. Zhao, B. Nie, J.J. Wang, L. Zuo, C.M. Liu | Mater. Sci. Forum | 2012, 702-703: 356-359 |
| 64 | EBSD-based crystallographic study on a Ni-Mn-Ga alloy with incommensurate 7Mstructure | Z.B. Li, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 530-535 |
| 65 | Importance of microscale texture and grain boundary connectivity to percolation- dependent bulk properties in polycrystalline materials | T. Watanabe, S. Kobayashi, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 703-709 |
| 66 | Strong Goss texture in recrystallized Fe81Ga19 sheet | Z.H. He, Y.H. Sha, F. Zhang, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 742-745 |
| 67 | Observations on the effect of a high magnetic field annealing on the recrystallized microstructure and texture evolution in pure copper | T. He, T.Y. Kang, Z.J. Wang, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 411-414 |
| 68 | Nanocrystallization and texture transformation in the surface layer of copper induced by surface mechanical attrition | G. Liu, G. Wang, Y.D. Liu, B.L. Wu, X. Zhao,L. Zuo | Mater. Sci. Forum | 2012, 702-703: 858-861 |
| 69 | Determination of crystallographic elements (dislocation and surface plane) from automated TEM orientation determination | Y.D. Zhang, S.Y. Wang, C. Esling, X. Zhao,L. Zuo | Mater. Sci. Forum | 2012, 702-703: 866-871 |
| 70 | Deformation induced phase seperation of Ni45Co5Mn36.7In13.3 alloy at high temperature | G. Wang, C.Y. Wang, Z. Chen, W.R. Zhao, Y.D. Liu, Y.D. Wang,L. Zuo | Mater. Sci. Forum | 2012, 702-703: 896-899 |
| 71 | Investigation on texture evolution in plastic deformation layer of SMAT iron | W.Y. Chen, W.P. Tong, C.S. He, X. Zhao,L. Zuo | Mater. Sci. Forum | 2012, 702-703: 920-923 |
| 72 | Characteristics of microstructure and texture in the stir zone of friction stir welded Al-12.7Si-0.7Mg alloy | C.S. He, D. Wang, G. Zhao, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 702-703: 56-59 |
| 73 | DC casting, deformation and strengthening of Al-Si alloys | L. Zuo, F.X. Yu | Mater. Sci. Forum | 2012, 706-709: 186-193 |
| 74 | Effect of cold deformation on the paint-baking response of Al-Mg-Si alloy sheet for automotive body | N. Tian, L. Pan, C.C. Liu, J.J. Wang, G. Zhao, L. Zuo, C.M. Liu | Mater. Sci. Forum | 2012, 706-709: 414-419 |
| 75 | Deformability of eutectic Al-Si alloys produced by semi-continuously DC casting during hot-rolling | T. Hong, G. Zhao, N. Tian, F.X. Yu, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 436-440 |
| 76 | Effects of Co addition on crystal structure, thermal stability and magnetic properties of Ni-Mn-Ga ferromagnetic shape memory alloys from first-principles calculations | J. Bai, J.M. Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 1985-1990 |
| 77 | Texture evolution in nanocrystalline Fe induced by surface mechanical attrition treatment | W.Y. Chen, W.P. Tong, C.S. He, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 2663-2667 |
| 78 | Calculation methods to determine crystallographic elements based on electron diffraction orientation measurements by SEM/EBSD or TEM | Y.D. Zhang, Z.B. Li, C. Esling, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 2674-2679 |
| 79 | Effects of magnetic field intensity on microstructure and orientation of proeutectoid ferrite in Fe-C alloy | X.X. Zhang, Y.D. Zhang, S.J. Wang, C. Esling, X. Zhao, L. Zuo | Mater. Sci. Forum | 2012, 706-709: 2680-2684 |
| 80 | Microstructures and mechanical properties of SiC-TiB2 composite prepared by pressureless sintering | X.Y. Yue, J.J. Wang, Q. Sun, H.Q. Ru | Key Eng. Mater. | 2012, 512-515: 812-815 |
| 81 | Microstructures and properties of hypoeutectic Al-Si alloy extruded in semi-solid state | D.Z. Zhao, F.X. Yu, F. Liu, K.Z. He, L. Zuo | Adv. Mech. Mater. | 2012, 152-154: 326-330 |
| 82 | Effect of strain rate on the microstructural development in DC cast Al-15Si alloy | C.X. Wang, F.X. Yu, X. Zhao, L. Zuo | Light Metals 2012 | 2012, 403-406 |
| 83 | The effect of artificial aging treatment on microstructure and tensile properties of Al-12.7Si-0.7Mg alloy | F. Liu, F.X. Yu, D.Z. Zhao, L. Zuo | Light Metals 2012 | 2012, 453-459 |
| 84 | Hot deformation behavior and microstructure evolution of a DC cast hypereutectic Al-Si alloy | K.Z. He, F.X. Yu, D.Z. Da, L. Zuo | Appl. Mech. Mater. | 2012, 151: 332-336 |
| 85 | Effects of vibrating flow by inclined plate on solute distribution and microstructural formation | R.G. Guo, Y.Z. Zhao, C.M. Liu | Proc. of Inter. Workshop on Solidification, Xi’an, China | 2012 |
| 86 | Effects of microstructure on deformation and fracture behavior of Titanium alloys | L. Wang, T. Yu, Y.Q. Zhao, Y. Liu | Proc. of 12th World Conf. on Titanium, Beijing, China | 2012, 928-931 |
| 87 | Preparation and electrochemical behavior of Ca-P containing porous titania coating on TiNbZrFe alloy by micro-arc oxidation | L. Jin, W.F. Cui, X. Song, L. Zhou, X.H. Liu | Proc. of 12th World Conf. on Titanium, Beijing, China | 2012 |
| 88 | Microstructure and wear properties of laser in-site formation of TiBx and TiC titanium composite coatings | J. Liang ,C.S. Liu, S.Y. Chen, C.X. Ren | TMS Annual Meeting | 2012: 27-34 |
| 89 | 1200℃合成Mn3O4-Fe2O3体系的物相关系、结构和阳离子分布 | 王 蓉，杨承旭，时迎国，孙玉增，李国宝，金头男，秦高梧，廖复辉，林建华 | 物理化学学报 | 2012, 28(5): 1021-1029 |
| 90 | 相场再结晶储能释放模型与显微组织演变的模拟研究 | 张宪刚，宗亚平，吴 艳 | 物理学报 | 2012, 61(8): 088104 |
| 91 | 纳米结构14Cr-ODS铁素体钢的制备与微观结构 | 吕 铮，卢晨阳，张守辉，谢 锐，刘春明 | 金属学报 | 2012, 48: 649-653 |
| 92 | Mg-Zn-Ca系低Ca侧400℃相平衡研究 | 李洪晓，任玉平，马倩倩，蒋 敏，秦高梧 | 金属学报 | 2012, 48(1): 70-75 |
| 93 | 长期时效对GH4169合金动态拉伸变形行为的影响 | 刘 杨，王 磊，何思斯，冯 飞，吕旭东，张北江 | 金属学报 | 2012, 48(1): 49-55 |
| 94 | Fe78Si9B13非晶磁粉芯工艺 | 唐 坚，连法增，于 敏，范宪勇 | 东北大学学报（自然科学版） | 2012, 33(3): 373-376 |
| 95 | 波浪形振动倾斜板半连续铸造半固态AZ91D镁合金 | 管仁国，赵占勇，戴春光，刘春明 | 东北大学学报（自然科学版） | 2012, 33(3): 381-384 |
| 96 | 新型定向凝固高温合金750℃抗热腐蚀性能 | 黄 炎，王 磊，刘 杨，吴剑涛 | 东北大学学报（自然科学版） | 2012, 33(3): 365-368 |
| 97 | 1Cr18Ni9Ti不锈钢剪切变形诱发的表面纳米化 | 莫成刚，刘 刚，武保林，左 良 | 东北大学学报（自然科学版） | 2012, 33: 815-818 |
| 98 | 强磁场对半无限Al/Cu固液扩散偶凝固组织的影响" | 徐 博，佟伟平，左 良，赫冀成 | 东北大学学报（自然科学版） | 2012, 33: 222-227 |
| 99 | 半连续铸造Al-15Si合金热压缩变形流变应力行为 | 王春霞，于福晓，赵大志，赵 骧，左 良 | 东北大学学报（自然科学版） | 2012, 33: 827-831 |
| 100 | Co-W磁性薄膜应变对其有效磁晶各向异性能的影响 | 秦高梧，肖 娜，李 松，任玉平 | 东北大学学报（自然科学版） | 2012, 33(1): 77-80 |
| 101 | 铁水包顶底喷粉脱硫对比试验研究 | 周建安，孙中强，战东平，刘春明 | 东北大学学报（自然科学版） | 2012, 33(1): 90-93 |
| 102 | Fe- Pt- Au三元系 950 ℃富 Fe角等温截面的研究 | 徐晓宁，任玉平，李俊杰，秦高梧 | 东北大学学报（自然科学版） | 2012, 33(2): 228-231 |
| 103 | 电镀锌板上复合硅烷膜的制备及性能 | 王 雷，刘常升，于海云，安成强 | 东北大学学报（自然科学版） | 2012, 33(3): 369-371 |
| 104 | 应力集中对2024铝合金高周疲劳寿命的影响 | 刘常升，李海雄，杨弥珺，陈岁元 | 东北大学学报（自然科学版） | 2012, 33(4): 517-521 |
| 105 | GH690合金拉伸变形行为的温度敏感性 | 王富强，王 磊，刘 杨，王 朋，封 辉 | 稀有金属材料与工程 | 2012, 41(3): 432-436 |
| 106 | 非晶Fe78Si9B13磁粉芯的制备及性能研究 | 唐 坚，连法增，于 敏，凌子坚 | 功能材料 | 2012, 43(1): 96-98 |
| 107 | 氮对马氏体不锈钢00Cr13Ni4Mo组织和性能的影响 | 马小平，王立军，王园园，秦 斌，刘春明，S. Subramanian | 材料热处理学报 | 2012, 33(4): 77-84 |
| 108 | 热镀锌钢表面乙烯基三乙氧基硅烷膜的腐蚀电化学行为 | 张旭明，刘春明，黄丽娟，殷跃军，韩常智 | 材料热处理学报 | 2012, 33(4): 147-151 |
| 109 | 脉冲N离子束轰击对TiAlN膜层和W18Cr4V高速钢结合力的影响 | 吕树国，刘常升，张 罡 | 材料保护 | 2012, 45(4): 18-20 |
| 110 | 脉冲N离子束轰击对TiAlN膜层耐磨性的影响 | 吕树国，刘常升，张 罡 | 科技创新导报 | 2012, 5: 6-8 |
| 111 | 颗粒复合电沉积对材料表面粗糙度的影响 | 谭 勇，刘常升，于晓中 | 钢铁钒钛 | 2012, 33(1): 87-91 |
| 112 | 镀锌板上丙烯酸树脂复合膜的制备和表征 | 王 雷，刘常升，安成强; | 腐蚀科学与防护技术 | 2012, 24(3): 204-209 |
| 113 | 固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响 | 洪 涛，龚园平，田 妮，赵 刚，于福晓, 左 良 | 稀有金属 | 2012, 36(3): 368-372 |
| 114 | 无取向硅钢表面纳米结构的渗硅行为 | 莫成刚，刘 刚，黄 璞，左 良 | 钢铁 | 2012, 47(3): 61-64 |
| 115 | 抗辐照合金的发展与纳米结构ODS钢的抗辐照性能 | 吕 铮，刘春明 | 材料与冶金学报 | 2012, 11(1): 47-53 |
| 116 | 空冷高硅中碳低合金钢的组织与性能 | 苗 隽，王立军，刘春明 | 材料与冶金学报 | 2012, 11(1): 33-37 |
| 117 | 无铬达克罗成膜物质的研究进展 | 张旭明，刘春明，王建军，殷跃军，韩常智 | 材料与冶金学报 | 2012, 11(1): 58-63 |
| 118 | 3%无取向硅钢薄板的表面纳米化结构与性能 | 莫成刚，刘 刚，刘金阳，武保林，左 良 | 材料与冶金学报 | 2012, 11(1): 43-46 |
| 119 | 固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响 | 洪 涛，龚园平，田 妮，赵 刚，于福晓，左 良 | 稀有金属 | 2012, 36(3): 368-372 |
| 120 | 中子辐照引起的核反应堆压力容器钢中磷的晶间偏析 | 吕 铮，刘春明 | 中国金属学会低合金钢分会第一届学术年会论文集 | 2012, 73-82 |