| 序号 | 论文题目 | 作者 | 期刊(会议) | 年, 卷, 期：起-止页码 |
| 1 | Uniform colloidal spheres for (Y1-xGdx)2O3: formation mechanism, compositional impacts, and physicochemical properties of the oxides | J.G. Li, X.D. Li, X.D. Sun, T. Ikegami, T. Ishigaki | Chem. Mater. | 2008, 20: 2274-2281 |
| 2 | Plastic behavior of a nickel-based alloy under monotonic-tension and low-cycle-fatigue loading | E.W. Huang, R.I. Barabash, Y.D. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike, D.L. Klarstrom | Int. J. Plasticity | 2008, 24: 1440-1456 |
| 3 | MFM analysis of the magnetization process in L10–A1 FePt patterned film fabricated by ion irradiation | T. Hasegawa, W.L. Pei, T. Wang, Y. Fuc, T. Washiya, H. Saito, S. Ishio | Acta Mater. | 2008, 56: 1564-1569 |
| 4 | In-situ high-energy X-ray studies of magnetic-field-induced phase transition in a ferromagnetic shape memory Ni-Co-Mn-In alloy | Y.D. Wang, E.W. Huang, Y. Ren, Z.H. Nie, G. Wang, Y.D. Liu, J.N. Deng, H. Choo, P.K. Liaw, D.E. Brown, L. Zuo | Acta Mater. | 2008, 56: 913-923 |
| 5 | Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling | N. Jia, R. Lin Peng, Y.D. Wang, S. Johansson, P.K. Liaw | Acta Mater. | 2008, 56: 782-793 |
| 6 | Monodispersed colloidal spheres for uniform Y2O3:Eu3+ red-phosphor particles and greatly enhanced luminescence by simultaneous Gd3+ doping | J.G. Li, X.D. Li, X.D. Sun, T. Ishigaki | J. Phys. Chem. C | 2008, 112: 11707-11716 |
| 7 | A facile and template-free method to prepare mesoporous gold sponge and its pore size control | G.W. Qin, J.C. Liu, T. Balaji, X.N. Xu, H. Matsunaga, Y. Hakuta, L. Zuo, P. Raveendran | J. Phys. Chem. C | 2008, 112: 10352-10358 |
| 8 | Tb3+ and Eu3+ doped lanthanum oxysulfide nanocrystals - gelatin templated synthesis and luminescence properties | Z.G. Liu, X.D. Sun, S.K. Xu, J.B. Lian, X.D. Li, Z.M. Xiu, Q. Li, D. Huo, J.G. Li | J. Phys. Chem. C | 2008, 112: 2353-2358 |
| 9 | Selective recovery of nickel and cobalt from cobalt-enriched Ni-Cu matte by two-stage counter-current leaching | Y.F. Shen, W.Y. Xue, W. Li, Y.L. Tang | Sep. Purif. Technol. | 2008, 60: 113-119 |
| 10 | Direct evidence of detwinning in polycrystalline Ni–Mn–Ga ferromagnetic shape memory alloys during deformation | Z.H. Nie, R. Lin Peng, S. Johansson, E.C. Oliver, Y. Ren, Y.D. Wang, Y.D. Liu, J.N. Deng, L. Zuo, D.E. Brown | J. Appl. Phys. | 2008, 104: 103519-1-5 |
| 11 | Nanocrystalline scandia powders via oxalate precipitation: The effects of solvent and solution pH | Z.M. Xiu, J.G. Li, X.D. Li, D. Huo, X.D. Sun, T. Ikegami, T. Ishigaki | J. Am. Ceram. Soc. | 2008, 91: 603-606 |
| 12 | Micromechanical behaviors of duplex steel: in situ neutron diffraction measurements and simulations | N. Jia, Y.D. Wang, R. Lin Peng | J. Phys.: Condens. Matter | 2008, 20: 104259 |
| 13 | In-situ neutron diffraction study of micromechanical interactions and phase transformation in Ni-Mn-Ga alloy under uniaxial and hydrostatic stress | R. Lin Peng, Y.D. Wang, Z.H. Nie, E.C. Oliver, S. Johansson, Y.D. Liu, Y. Ren, J.D. Jorgensen, J. Fieramosca | J. Phys.: Condens. Matter | 2008, 20: 104256 |
| 14 | In vitro effect of magnesium inclusion in sol-gel derived apatite | G.C. Qi, S. Zhang, K.A. Khor, C.M. Liu, X.T. Zeng, W.J. Weng, M. Qian | Thin Solid Films | 2008, 516: 5176-5180 |
| 15 | An interfacial study of sol-gel-derived magnesium apatite coatings on Ti6Al4V substrates | G.C. Qi, S. Zhang, K.A. Khor, W.J. Weng, X.T. Zeng, C.M. Liu | Thin Solid Films | 2008, 516: 5172-5175 |
| 16 | Mechanical properties of nanocrystalline nickel films deposited by pulse plating | Y.F. Shen, W.Y. Xue, Y.D. Wang, Z.Y. Liu, L. Zuo | Surf. Coat. Technol. | 2008, 202: 5140-5145 |
| 17 | Sintering densification, microstructure and transformation behavior of Al2O3/ZrO2(Y2O3) composites | W.M. Ma, L. Wen, R.G. Guan, X.D. Sun, X.K. Li | Mater. Sci. Eng. A | 2008, 477: 100-106 |
| 18 | Preparation of Al2O3 and Al2O3-ZrO2 ceramic foams with adjustable cell structure by centrifugal slip casting | J.Y. Yu, X.D. Sun, Q. Li, X.D. Li | Mater. Sci. Eng. A | 2008, 476: 274-280 |
| 19 | Martensitic and magnetic transformation in Ni-Mn-Ga-Co ferromagnetic shape memory alloys | D.Y. Cong, S. Wang, Y.D. Wang, Y. Ren, L. Zuo, C. Esling | Mater. Sci. Eng. A | 2008, 473: 213-218 |
| 20 | Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion | L.L. Chang, Y.N. Wang, X. Zhao, J.C. Huang | Mater. Sci. Eng. A | 2008, 496: 512-516 |
| 21 | Tensile behaviors of IF steel with different cold-rolling reductions | Y.F. Shen, W.Y. Xue, Y.D. Wang, Y.D. Liu, L. Zuo | Mater. Sci. Eng. A | 2008, 496(1-2): 383-388 |
| 22 | Texture evolution analysis of warm-rolled Fe–28Mn–6Si–5Cr shape memory alloy | H. Li, F. Yin, T. Sawaguchi, K. Ogawa, X. Zhao, K. Tsuzaki | Mater. Sci. Eng. A | 2008, 494: 217–226 |
| 23 | Simulations of texture evolution in heavily-deformed bulk nanocrystalline nickel | Y.L. Yang, N. Jia, Y.D. Wang, Y.F. Shen, H. Choo, P.K. Liaw | Mater. Sci. Eng. A | 2008, 493: 86-92 |
| 24 | Direct experimental mapping of microscale deformation heterogeneity in duplex stainless steel | N. Jia, R.L. Peng, G.C. Chai, S. Johansson, Y.D. Wang | Mater. Sci. Eng. A | 2008, 491: 425-433 |
| 25 | The influence of the molar ratio of Al2O3 to Y2O3 on sintering behavior and the mechanical properties of a SiC-Al2O3-Y2O3 ceramic composite | N. Zhang, H.Q. Ru, Q.K. Cai, X.D. Sun | Mater. Sci. Eng. A | 2008, 486: 262-266 |
| 26 | Intermediate annealing of pure copper during cyclic equal channel angular pressing | W.Z. Han, S.D. Wu, S.X. Li, Y.D. Wang | Mater. Sci. Eng. A | 2008, 483-484: 430-432 |
| 27 | Fatigue fracture behavior of a single-slip-oriented Fe-35 wt.% Cr alloy single crystal containing fine-scale Cr-rich precipitates | X.W. Li, Y. Umakoshi | Mater. Sci. Eng. A | 2008, 483-484: 426-429 |
| 28 | Tensile and fatigue strength of ultrathin copper films | G.P. Zhang, K.H. Sun, B. Zhang, J. Gong, C. Sun, Z.G. Wang | Mater. Sci. Eng. A | 2008, 483-484: 387-390 |
| 29 | Formation of aligned two-phase microstructure in Fe-0.25 mass%C alloy under gradient high magnetic fields | K. Wang, Q. Wang, C. Wang, E. Wang, C.M. Liu, J.C. He | Mater. Lett. | 2008, 62: 1466-1468 |
| 30 | Single-walled carbon nanotube reinforced copper composite coatings prepared by electrodeposition under ultrasonic field | Y.L. Yang, Y.D. Wang, Y. Ren, C.S. He, J.N. Deng, J. Nan, J.G. Chen, L. Zuo | Mater. Lett. | 2008, 62: 47-50 |
| 31 | High ductility of ultrafine-grained steel via phase transition | S. Cheng, H. Choo, Y.H. Zhao, X.L. Wang, Y.T. Zhu, Y.D. Wang, J. Almer, P.K. Liaw, J.E. Jin, Y.K. Lee | J. Mater. Res | 2008, 23: 1578-1586 |
| 32 | Plasticity of bulk metallic glasses improved by controlling the solidification condition | Z.W. Zhu, S.J. Zheng, H.F. Zhang, B.Z. Ding, Z.Q. Hu, P.K. Liaw, Y.D. Wang, Y. Ren | J. Mater. Res. | 2008, 23: 941-948 |
| 33 | Osteoblastic cell response on magnesium-incorporated apatite coatings | G.C. Qi, S. Zhang, K.A. Khor, S.W. Lye, X.T. Zeng, W.J. Weng, C.M. Liu, S.S. Venkatraman, L.L. Ma | Appl. Surf. Sci. | 2008, 255: 304-307 |
| 34 | Phase formation of Al2O3/Ti(C,N)-NiTi Composite | Z.M. Xiu, J. Laeng, X.D. Sun, Q. Li, S. K. Hur, Y.N. Liu | J.Alloy Compd. | 2008, 458: 398-404 |
| 35 | In-situ high-energy X-ray diffuse-scattering study of the phase transition in a Ni2MnGa ferromagnetic shape-memory alloy | G. Wang, Y.D. Wang, Y. Ren, Y.D. Liu, P.K. Liaw | Metall. Mater. Trans. A | 2008, 39: 3184-3190 |
| 36 | Tensile deformation behavior of duplex stainless steel studied by in-situ time-of-flight neutron diffraction | N. Jia, R.L. Peng, D.W. Brown, B. Clausen, Y.D. Wang | Metall. Mater. Trans. A | 2008, 39: 3134-3140 |
| 37 | Phase transition and texture evolution in the Ni-Mn-Ga ferromagnetic shape-memory alloys studied by a neutron diffraction technique | Z.H. Nie, Y.D. Wang, G.Y. Wang, J.W. Richardson, G. Wang, Y.D. Liu, P.K. Liaw, L. Zuo | Metall. Mater. Trans. A | 2008, 39: 3113-3119 |
| 38 | Advanced micromechanical model for TRIP steels with application of in-situ high energy X-ray diffraction method | K.S. Choi, W.N. Liu, X. Sun, M.A. Khaleel, Y. Ren, Y.D. Wang | Metall. Mater. Trans. A | 2008, 39: 3089-3096 |
| 39 | Ti-based devitrified bulk metallic glasses with good plasticity | F. Jiang, H.Q. Li, G.J. Fan, Y.D. Wang, P.K. Liaw, H. Choo | Metall. Mater. Trans. A | 2008, 39: 1817-1821 |
| 40 | New sequences of phase transition in Ni-Mn-Ga ferromagnetic shape memory nanoparticles | D.M. Liu, Z.H. Nie, Y.D. Wang, Y.D. Liu, G. Wang, Y. Ren, L. Zuo | Metall. Mater. Trans. A | 2008, 39: 466-469 |
| 41 | Effect of Co on the thermal stability and impact toughness of sintered Nd–Fe–B magnets | Z.H. Hu, F.Z. Lian, M.C. Zhu, W. Li | J. Magn. Magn. Mater. | 2008, 320: 2364-2369 |
| 42 | Effect of Tb on the intrinsic coercivity and impact toughness of sintered Nd-Dy-Fe-B magnets | Z.H. Hu, F.Z. Lian, M.G. Zhu, W. Li | J. Magn. Magn. Mater. | 2008, 320: 1735-1738 |
| 43 | A novel analysis method for noise of perpendicular recording media | W.L. Pei, G.W. Qin, S. Ishio, Y.P. Ren, H. Sato, T. Washiya, K. Miura | J. Magn. Magn. Mater. | 2008, 320: 3165-3168 |
| 44 | Improvement of recrystallization texture and magnetic property in non-oriented silicon steel by asymmetric rolling | Y.H. Sha, F. Zhang, S.C. Zhou, W. Pei, L. Zuo | J. Magn. Magn. Mater. | 2008, 320: 393-396 |
| 45 | Effects of Nb on the coercivity and impact toughness of sintered Nd-Fe-B magnets | Z.H. Hu, M.G. Zhu, W. Li, F.Z. Lian | J. Magn. Magn. Mater. | 2008, 320: 96-99 |
| 46 | Effects of high magnetic field strength and direction on pearlite formation in Fe–0.12%C steel | J.Y. Song, Y.D. Zhang, X. Zhao, L. Zuo | J. Mater. Sci. | 2008, 43: 6105-6108 |
| 47 | Stress-amplitude-dependent deformation characteristics and microstructures of cyclically stressed ultrafine-grained copper | X.W. Li, Q.W. Jiang, Y. Wu, Y. Wang, Y. Umakoshi | Adv. Eng. Mater. | 2008, 10: 720-726 |
| 48 | Temperature-dependent deformation and damage behaviour of ultrafine-grained copper under uniaxial compression | Z.Y. Yu, Q.W. Jiang, X.W. Li | Phys. Stat. Sol. A | 2008, 205: 2417-2421 |
| 49 | Electric current-induced failure of 200-nm-thick gold interconnects | B. Zhang, Q.Y. Yu, J. Tan, G.P. Zhang | J. Mater. Sci. Technol. | 2008, 24: 895-898 |
| 50 | A phase-field model to simulate recrystallization in an AZ31 Mg alloy in comparison of experimental data | M.T. Wang, B.Y. Zong, G. Wang | J. Mater. Sci. Technol. | 2008, 24: 829-834 |
| 51 | Observation of β-relaxation in sub-Tg isothermally annealed Al-based metallic glasses | H.W. Yang, W.P. Tong, X. Zhao, L. Zuo, J.Q. Wang | Chin. Phys. Lett. | 2008, 25: 3357-3359 |
| 52 | Study of fatigue dislocation strctures in [233] coplanar double-slip-oriented copper single crystals using SEM electronic channeling contrast | Y. Zhou, X.W. Li, R.Q. Yang | Int. J. Mat. Res. | 2008, 99: 958-963 |
| 53 | Effects of magnetic field strength on microstructure and texture evolution in cold-rolled interstitial-free steel by magnetic field annealing | Y. Wu, C.S. He, X. Zhao, L. Zuo, T. Watanabe | Acta Metall. Sin. (Engl. Lett.) | 2008, 21: 103-108 |
| 54 | Isothermal section of Mg-Zn-La system in Mg rich corner at 350℃ | M.L. Huang, H.X. Li, H. Ding, Y.P. Ren, S.M. Hao | Acta Metall. Sin. (Engl. Lett.) | 2008, 21: 329-335 |
| 55 | Amino-tris-(methylenephosphonic acid) layers adsorption on AA6061 aluminum alloy | S.H. Wang, C.S. Liu, F.J. Shan, G.C. Qi | Acta Metall. Sin. (Engl. Lett.) | 2008, 21: 355-361 |
| 56 | Corrosion behavior of a zirconium-titanium based phosphonic acid conversion coating on AA6061 aluminium alloy | S.H. Wang, C.S. Liu, F.J. Shan | Acta Metall. Sin. (Engl. Lett.) | 2008, 21: 269-274 |
| 57 | Corrosion resistance of hot dip galvanizedsteel pretreated with bis-functional silanes modified with nanoalumina | F.J. San, C.S. Liu, S. H. Wang, G.C. Qi | Acta Metall. Sin. (Engl. Lett.) | 2008, 21: 245-252 |
| 58 | Effects of recrystallization on low cycle fatigue behavior of directionally solidified superalloy DZ40M | Y. Zhao, L. Wang, H.Y. Li, T. Yu, Y. Liu | Rare Metals | 2008, 27: 425-428 |
| 59 | Temperature stability and microstructure of ultra-high intrinsic coercivity Nd-Fe-B magnets | Z.H. Hu, X.H. Cheng, M.G. Zhu, W. Li, F.Z. Lian | Rare Metals | 2008, 27: 358-361 |
| 60 | Influence of vanadium on grain growth of deformation induced ferrite in low carbon steel during continuous cooling process | K. Wang, Q. Wang, J. He, C. M. Liu | Steel Res. Inter. | 2008, 79: 712-716 |
| 61 | Overheating temperature of 7B04 high strength aluminum alloy | F.H. Gao, N.K. Li, N. Tian, Q. Sun, X.D. Liu, G. Zhao | Trans. Nonf. Met. Soc. China | 2008, 18: 321-326 |
| 62 | Barium phosphate conversion coating on die-cast AZ91D magnesium alloy | F. Liu, D.Y. Shan, E.H. Han, C.S. Liu | Trans. Nonf. Met. Soc. China | 2008, 18: s344-s348 |
| 63 | Recovery of Co(Ⅱ) and Ni(Ⅱ) from hydrochloric acid solution of alloy scrap | Y.F. Shen, W.Y. Xue, W.Y. Niu | Trans. Nonf. Met. Soc. China | 2008, 18: 1262-1268 |
| 64 | Thermodynamic calculations of melt in melt pool during laser cladding high Si coatings | D.Y. Dong, C.S. Liu, B. Zhang | J. Iron Steel Res. (Inter.) | 2008, 15: 5-10 |
| 65 | Modeling of failure modes induced by plastic strain localization in dual phase steels | W.N. Liu, K.S. Choi, X. Sun, M.A. Khaleel, Y. Ren, N. Jia, Y.D. Wang | SAE Inter. | 2008, (1): 1114 |
| 66 | Stress in particulate reinforcements and overall stress response on aluminum alloy matrix composites during straining by analytical and numerical modeling | N. Xu, B.Y. Zong | Computational Materials Science | 2008, 43: 1094-1100 |
| 67 | Orientation relationship, texture and miciostructure in electromagnetic processed materials (EPM) | Y.D. Zhang, C. Esling, D.Y. Cong, X. Zhao, L. Zuo | Arch. Metall. Mater. | 2008, 53: 17-23 |
| 68 | Texture and micro-hardness evolution of submicrograined copper | X.S. Yao, Y.D. Liu, Q.W. Jiang, X. Zhao, L. Zuo | Ceram. Trans. | 2008, 201: 725-730 |
| 69 | Effects of magnetic field direction on texture evolution in a cold-rolled interstitial-free steel sheet during high magnetic field annealing | Y. Wu, X. Zhao, C.S. He, L. Zuo, C. Esling | Ceram. Trans. | 2008, 200: 435-442 |
| 70 | New approach to texturing and grain boundary engineering by magnetic field application | T. Watanabe, X. Zhao, L. Zuo, S. Tsurekawa, C. Esling, Y.D. Zhang | Ceram. Trans. | 2008, 200: 421-434 |
| 71 | Crystallographic features during martensitic transformation in Ni-Mn-Ga ferromagnetic shape memory alloys | D.Y. Cong, Y.D. Zhang, C. Esling, Y.D. Wang, X. Zhao, L. Zuo | Ceram. Trans. | 2008, 200: 397-404 |
| 72 | Charecteristics of recrystallization texture of cold-rolled IF steel sheet annealing with a magnetic field in the transverse direction | Y. Wu, C.S. He, Y.D. Zhang, X. Zhao, L. Zuo, C. Esling | Ceram. Trans. | 2008, 200: 389-396 |
| 73 | Eutectoid point shift and orientation relationships between ferrite and cementite in pearlite in a high magnetic field | Y.D. Zhang, C. Esling, H. Klein, X. Zhao, L. Zuo | Ceram. Trans. | 2008, 200: 381-388 |
| 74 | Fabrication of transparent YAG ceramics from Co-precipitation systhesized nanopowders | G.Z. Lv, X.D. Li, D. Huo, X.D. Sun, S.W. Chen, C.T. Tsai, Y.N. Liu, K. Duan | Adv. Mater. Res. | 2008, 41-42: 271-276 |
| 75 | Preparation of open-cell alumina ceramic foam with uniform cell structure using plant seed template | J.Y. Yu, X.D. Sun, Q. Li, X.D. Li, Y.N. Liu, K. Duan | Adv. Mater. Res. | 2008, 41-42: 265-270 |
| 76 | Effect of boron purity on superconducting properties of SiC doped MgB2 | B. Qu, X.D. Sun, Z.M. Xiu, J. H. Kim, S.X. Dou,Y.N. Liu, K. Duan | Adv. Mater. Res. | 2008, 41-42: 253-258 |
| 77 | Effect of sintering conditions on the properties of Al2O3/Ti(C,N) ceramics | Z.M. Xiu, X.D. Sun, K. Duan, X.Z. Hu, X.K. Li | Adv. Mater. Res. | 2008, 41-42: 241-246 |
| 78 | Modeling and analysis of compressive properties of porous NiTi shape memory alloy using artificial neural network | Q. Li, X.D. Sun, J.Y. Yu, Z.G. Liu, K. Duan | Adv. Mater. Res. | 2008, 41-42: 135-140 |
| 79 | Fabrication and properties of hytroxyapatite-Ti network composites | Z.M. Xiu, Y. Liu, J.G. Li, D. Huo, X.D. Li, X.D. Sun, K. Duan, X.Z. Hu | Adv. Mater. Res. | 2008, 41-42: 41-48 |
| 80 | Effect of a high magnetic field on eutectoid point shift and texture evolution in 0.81C-Fe steel | Y.D. Zhang, C. Esling, M. Calcagnotto, M.L. Gong, X. Zhao, L. Zuo | Texture, Stress & Microstruct | 2008: 349854 |
| 81 | Hot ductility of Fe-18Cr-12Mn-0.55N high nitrogen austenitic stainless steel | F. Shi, L.J. Wang, W.F. Cui, Z.B. Li, M.Z. Xu, C.M. Liu | Mater. Sci. Forum | 2008, 575-578: 1056-1061 |
| 82 | The in situ study on the micro-structural characters of IF steel at early stage of recrystallization using high-energy X-ray | T. He, Y.D. Liu, Q.W. Jiang, Y. Ren, G. Wang, Y.D. Wang, X. Zhao, L. Zuo | Mater. Sci. Forum | 2008, 575-578: 972-977 |
| 83 | Study on deformation induced ferrite transformation in mild steels with or without niobium | L.J. Wang, L.D. Yao, H.P. Ren, C.M. Liu | Mater. Sci. Forum | 2008, 575-578: 898-903 |
| 84 | First principle calculation of the structural and electronic property of Zr doped B13C2 | L. Yu, H.Q. Ru,Y.L. Jiang, L. Zuo, X.X. Xue | 137th TMS Annual Meeting & Exhibition Suppl. Proc.: Mater. Character., Comput. & Modeling, New Orleans, USA | 2008: 189-193 |
| 85 | The coming of grain boundaryengineering in the 21st century | T. Watanabe, S. Tsurekawa, X. Zhao, L. Zuo | Inter. Conf. on Microstruct. & Texture in Steels, Jamshedpur, India | 2008; Chapter 4, 43-83 |
| 86 | Photocatalytic activities of iron oxyhydroxide nanorods synthesized by hydrothermal technology | S. Li, X.Y. Wang, G.W. Qin, W.L. Pei, Y.P. Ren, L. Zuo, Y.D. Zhang, C. Esling | 2nd Inter. Symp. on Phys. and High-Tech Ind., 4th Inter. Symp. on Magnetic Ind., Shenyang, China | 2008: 137-139 |
| 87 | 烧结Nd-Fe-B磁体的微观结构和冲击韧性研究 | 胡志华，连法增，朱明刚，李 卫 | 物理学报 | 2008, 57(2): 1202-1206 |
| 88 | NiTi合金的第一性原理研究 | 朱建新，李永华，孟繁玲，刘常升，郑伟涛，王煜明 | 物理学报 | 2008, 57(11): 5027 |
| 89 | 磁场强度对Fe-0.76%C合金先共析铁素体显微组织的影响 | 宫明龙，赵 骧，王守晶，左 良 | 金属学报 | 2008, 44(5): 615-618 |
| 90 | Mg-Zn-Nd合金中的低Nd三元化合物T1相的研究 | 黄明丽，李洪晓，杨金艳，任玉平，丁 桦，郝士明 | 金属学报 | 2008, 44(4): 385-390 |
| 91 | TiB2含量对B4C-TiB2-Al复合材料组织与力学性能的影响 | 吕 鹏，茹红强，喻 亮，刘立显，孙旭东 | 金属学报 | 2008, 44(3): 314-318 |
| 92 | 激光熔覆Fe-Si涂层的超精细结构 | 董丹阳，刘常升，陈岁元，张 滨，苗 隽 | 金属学报 | 2008, 44(2): 188-192 |
| 93 | 粒子群优化在最大熵法定量织构分析中的应用 | 王大志，王大鹏，汪定伟，左 良，王 福，梁志德 | 金属学报 | 2008, 44(2): 183-187 |
| 94 | CaZr0.9In0.1O3-α高温质子导体管的制备及性质表征 | 王 东，史苍际，刘春明，王常珍 | 金属学报 | 2008, 44(2): 177-182 |
| 95 | 强磁场下奥氏体化温度对Fe-0.12%C合金中铁素体与珠光体形貌的影响 | 宋建宇，赵 骧，王守晶，宫明龙，左 良 | 金属学报 | 2008, 44(11): 1305-1309 |
| 96 | TMDSC表征Al85Ni5Y6Fe2Co2金属玻璃的玻璃转变 | 杨红旺，佟伟平，赵 骧，左 良，王建强 | 金属学报 | 2008, 44(11): 1384-1387 |
| 97 | 电场处理对一种镍基变形高温合金晶间腐蚀性能的影响 | 刘 杨，王 磊，霍健萍，乔雪璎，王延庆 | 稀有金属材料与工程 | 2008, 37(9): 1534-1538 |
| 98 | 定向凝固钴基高温合金DZ40M中碳化物析出与再结晶的交互作用 | 赵 阳，王 磊，于 腾，丁海峰 | 稀有金属材料与工程 | 2008, 37(3): 1032-1036 |
| 99 | cBN电子结构和光学性质的第一性原理计算 | 喻 亮，茹红强，左 良，薛向欣 | 稀有金属材料与工程 | 2008, 37(s1): 662-666 |
| 100 | 应变速率对电场处理GH4199合金拉伸变形行为的影响 | 刘 杨，王 磊，乔雪璎，王延庆 | 稀有金属材料与工程 | 2008, 37(1): 66-71 |
| 101 | 新型高强2A97铝锂合金组织和性能研究 | 袁志山，陆 政，谢优华，戴圣龙，刘常升 | 材料热处理学报 | 2008, 29(5): 54-57 |
| 102 | 自然时效及预时效6000系合金人工时效析出行为 | 刘 宏，赵 刚，刘春明，左 良 | 材料热处理学报 | 2008, 29(4): 74-78 |
| 103 | 海洋工程用超低碳贝氏体钢力学性能和海水腐蚀行为 | 董 杰，崔文芳，张思勋，刘春明 | 材料热处理学报 | 2008, 29(3): 99-103 |
| 104 | 基板温度对Co-Pt-P薄膜结构与磁性能的影响 | 杨 波，肖 娜，裴文利，任玉平，赵 骧，秦高梧 | 功能材料 | 2008, 39(1): 125-127 |
| 105 | 电沉积制备CuCo颗粒膜微观结构和巨磁电阻效应研究 | 赵 林，樊占国，秦高梧 | 功能材料 | 2008, 39(9): 1425-1429 |
| 106 | Gd2O2SO4粉体的合成及其晶体结构确定 | 连景宝，李晓东，丁少锋，高 铁，孙旭东 | 功能材料 | 2008, 39(7): 4801-6801 |
| 107 | (Gd1-x, Prx)2O2S闪烁陶瓷粉体的合成及光致发光研究 | 连景宝，李晓东，高 铁，刘志刚，李继光，孙旭东 | 功能材料 | 2008, 39(5): 713-716 |
| 108 | Nd13Fe80.1-xTixB6.5Zr0.1Cu0.3永磁合金磁性能研究 | 尤俊华，连法增，王继杰，赵康军，裴文利，李庆达 | 功能材料 | 2008, 39(4): 567-569 |
| 109 | 歧化氢压对Nd12.5Fe80.4-xCoxGa0.5Zr0.1B6.5各向异性HDDR磁粉性能的影响 | 赵康军，付 猛，尤俊华，连法增，陈志刚 | 功能材料 | 2008, 39(4): 563-566 |
| 110 | 铜板上激光熔覆制备Co-Ni-Cu梯度涂层 | 董 江，刘 芳，陈岁元，刘常升 | 东北大学学报(自然科学版） | 2008, 29(11): 1581-1584 |
| 111 | Al2O3对B4C-Al2O3-Al显微组织与力学性能的影响 | 吕 鹏，茹红强，喻 亮，孙旭东 | 东北大学学报(自然科学版) | 2008, 29(10): 7240-7244 |
| 112 | 强磁场退火对冷轧IF钢板再结晶织构的影响 | 吴 艳，赵 骧，何长树，左 良 | 东北大学学报(自然科学版) | 2008, 29(9): 1287-1290 |
| 113 | 热镀铝锌层镧掺杂硅烷钝化膜的腐蚀性能 | 单凤君，刘常升，王双红，刘 栋 | 东北大学学报(自然科学版） | 2008, 29(8): 1122-1125 |
| 114 | Al-6.5Zn-2.4Mg-2.3Cu铝合金半连续铸锭的均匀化处理 | 高凤华，田 妮，孙兆霞，赵 刚 | 东北大学学报(自然科学版) | 2008, 29(8): 1119-1122 |
| 115 | 医用Ti6Al7Nb 合金氧化行为及其磨损性能 | 郭爱红，崔文芳，刘向宏，周 廉 | 东北大学学报(自然科学版) | 2008, 29(7): 996-999 |
| 116 | NdFeCoBZrGa合金各向异性磁粉制备 | 尤俊华，连法增，王继杰，裴文利 | 东北大学学报(自然科学版) | 2008, 29(6): 853-856 |
| 117 | 扫描速度对硅钢表面激光熔覆层组织和硬度的影响 | 董丹阳，张 滨，陈岁元，刘常升 | 东北大学学报(自然科学版） | 2008, 29(6): 849-852 |
| 118 | 高镍铬无线冷硬铸铁轧辊表面激光合金化的研究 | 孙桂芳，刘常升，陶兴启，陈岁元 | 东北大学学报(自然科学版） | 2008, 29(6): 845-848 |
| 119 | 强磁场下Fe-C合金中碳的质量分数对先共析铁素体形貌的影响 | 王守晶，宋建宇，赵 骧，左 良 | 东北大学学报(自然科学版) | 2008, 29(5): 681-684 |
| 120 | 异步轧制对IF钢冷轧及再结晶织构的影响 | 贺 彤，刘沿东，蒋奇武，左 良 | 东北大学学报(自然科学版) | 2008, 29(4): 512-516 |
| 121 | 电场退火对冷轧工业纯锌板再结晶织构的影响 | 杜广煜，何长树，赵 骧，左 良 | 东北大学学报(自然科学版) | 2008, 29(4): 508-511 |
| 122 | Al-1.3Si-0.7Mg-0.7Cu-0.3Mn铝合金薄板在固溶处理过程中的组织转变 | 田 妮，赵 刚，刘春明，左 良 | 东北大学学报(自然科学版) | 2008, 29(1): 73-76 |
| 123 | 冷变形织构沿纯铜线材径向分布的研究 | 姚旭升，刘沿东，左 良 | 东北大学学报(自然科学版) | 2008, 29(3): 332-334 |
| 124 | 三维网络SiC陶瓷/金属复合材料摩擦性能的研究 | 茹红强，曲翔宇，马丽萍，里景阳 | 东北大学学报(自然科学版) | 2008, 29(1): 69-72 |
| 125 | Nd-（Fe、Co、Zr）-B纳米复合磁体的研究 | 连法增，尤俊华，裴文利，支起铮，杨 彬 | 中国稀土学报 | 2008, 26(3): 346-350 |
| 126 | 超细粉体制备Nd:Y2O3透明陶瓷 | 霍 地，孙旭东，刘亦农，张 牧，修稚萌，李晓东 | 中国稀土学报 | 2008, 26(1): 56-60 |
| 127 | 强磁场下不同保温时间对Fe-0.76%C钢先共析铁素体组织形貌的影响 | 宫明龙，赵 骧，宋建宇，王守晶，左 良 | 钢铁 | 2008, 43(11): 82-85 |
| 128 | 无取向硅钢热轧板在常化过程中织构变化 | 董 浩，赵 宇，喻晓军，连法增 | 钢铁 | 2008, 43(9): 79-81 |
| 129 | 二次冷轧压下率对非取向电工钢薄带磁性和织构的影响 | 董 浩，赵 宇，喻晓军，连法增 | 钢铁 | 2008, 43(5): 80-83 |
| 130 | 冷拔珠光体钢丝帘线中织构演变的定量研究 | 姚旭升，刘沿东，左 良 | 钢铁 | 2008, 43(3): 65-67，71 |
| 131 | GH4586合金高温变形过程中的动态再结晶行为 | 王 帅，王 磊，赵海洋，刘 杨 | 材料科学与工艺 | 2008, 16(S1): 68-72 |
| 132 | 激光重熔对热浸渗铝层组织和性能的影响 | 蒋 鸣，李国喜，刘常升，郑毅然 | 材料科学与工艺 | 2008, 16(3): 853 |
| 133 | 耐热钢表面激光熔覆Co基合金涂层的高温性能 | 张 松，张春华，王明生，王茂才，刘常升 | 腐蚀科学与防护技术 | 2008, 20(2): 181-183 |
| 134 | 镀锌板的有机硅烷钝化技术及其研究进展 | 王双红，刘常升，单凤君 | 腐蚀科学与防护技术 | 2008, 20(1): 35-37 |
| 135 | 非调质N80钢热浸镀55%Al-Zn合金助镀剂的研究 | 蒋 鸣，李国喜，刘常升，郑毅然，李 骏 | 腐蚀科学与防护技术 | 2008, 20(5): 47-50 |
| 136 | 镁对IF钢热镀锌镀层的组织和性能的影响 | 曲家惠，金 浩，王 福，刘沿东 | 腐蚀科学与防护技术 | 2008, 20(1): 8-11 |
| 137 | 激光共聚焦显微镜在磨损表面粗糙度表征中的应用 | 孙大乐，吴 琼，刘常升，张 恒，姚利松 | 中国激光 | 2008, 35(9): 0141 |
| 138 | 铜合金表面激光原位制备颗粒增强钴基合金涂层组织 | 李慧莉，陈岁元，刘大亮，刘常升 | 中国激光 | 2008, 35(4): 126 |
| 139 | 强磁场下冷却速率对Fe-0.76%C钢先共析铁素体组织的影响 | 宫明龙，王守晶，赵 骧，左 良 | 材料研究学报 | 2008, 22(5): 490-494 |
| 140 | 热镀铝锌层铈掺杂硅烷钝化膜的性能 | 单凤君，刘常升，王双红，齐国超，刘 栋 | 材料研究学报 | 2008, 22(2): 197-200 |
| 141 | 热压温度对C-SiC-B4C复合材料性能的影响 | 喻 亮，茹红强，蔡继东，左 良 | 材料研究学报 | 2008, 22(1): 107-112 |
| 142 | TiNi形状记忆合金薄膜结晶粒子的长大行为 | 孟繁玲，李永华，刘常升，徐 跃，王煜明 | 吉林大学学报(理学版) | 2008, 46(3): 235-238 |
| 143 | 用SAXS研究1420合金时效回归再时效析出d相 | 孟繁玲，李永华，刘常升，徐 跃，王煜明 | 吉林大学学报(理学版) | 2008, 46(5): 320-323 |
| 144 | 钙对镁合金表面锰系转化膜的影响 | 刘 锋，单大勇，韩恩厚，刘常升 | 中国有色金属学报 | 2008, 18(10): 1825-1829 |
| 145 | CrNiMo不锈钢激光熔覆NiCrSiB涂层空蚀行为 | 张小彬，臧辰峰，陈岁元，刘常升 | 中国有色金属学报 | 2008, 18(6): 1064-1068 |
| 146 | 热压C-SiC-B4C-TiB2复合材料的组织与性能 | 喻 亮，茹红强，蔡继东，杨 超，左 良，薛向欣 | 中国有色金属学报 | 2008, 18(2): 271-277 |
| 147 | 国内外镀锡板生产发展状况 | 王晓东，黄久贵，李建中，田彦文，刘常升 | 上海金属 | 2008, 30(4): 64 |
| 148 | 铜合金表面激光诱导原位反应制备颗粒增强Co基复合合金涂层 | 陈岁元，王建访，刘常升，梁 京 | 复合材料学报 | 2008, 25(4): 721 |
| 149 | 包覆镍铁氧体涂层的多孔陶瓷复合材料的制备与电磁性能 | 赵海涛，孙旭东，马瑞廷 | 复合材料学报 | 2008, 25(4): 941-351 |
| 150 | 刀具氮化物涂层的研究进展 | 赵时璐，李 友，张 钧，王 闯，刘常升 | 金属热处理 | 2008, 33(9): 99-102 |
| 151 | 玻璃微珠表面镍铁氧体包覆层的制备和性能 | 赵海涛，孙旭东，马瑞廷，张 罡 | 硅酸盐学报 | 2008, 36(12): 1781-1784 |
| 152 | 钢结构建筑用耐火钢的研究 | 董 杰，王华川，张 婕，沈俊昶，杨才福，刘春明 | 莱钢科技 | 2008, 1: 34-39 |
| 153 | 新型医用TiNbZrFe合金组织与力学性能 | 郭爱红，崔文芳，刘向宏，周 廉 | 材料与冶金学报 | 2008, 7(4): 288-294 |
| 154 | 7050铝合金半连续铸锭DSC分析过程组织的变化 | 高凤华，李念奎，田 妮，赵 刚 | 材料与冶金学报 | 2008, 7(3): 211-219 |
| 155 | 强磁场下退火温度对Fe-0.36%C合金铁素体转变的影响 | 王守晶，赵 骧，左 良 | 材料与冶金学报 | 2008, 7(3): 192-195 |
| 156 | 强磁场下奥氏体化温度对Fe-0.76%C钢先共析铁素体组织的影响 | 宫明龙，赵 骧，王守晶，宋建宇，左 良 | 材料与冶金学报 | 2008, 7(3): 187-191 |
| 157 | 超低碳贝氏体高强度钢的腐蚀性能研究 | 董 杰，张思勋，王慧玉，韩文习，刘春明 | 武汉科技大学学报（自然科学版） | 2008, 31(2): 127-131 |
| 158 | 7050合金半连续铸锭中结晶相及其均匀化处理 | 高凤华，李念奎，丛福官，田 妮，赵 刚 | 稀有金属 | 2008, 32(3): 274-278 |
| 159 | 2124铝合金在加载时效时的变形特点 | 权力伟，丛福官，刘春城，李念奎，田 妮，赵 刚 | 轻合金加工技术 | 2008, 36(7): 36-40 |
| 160 | d-HDDR工艺及合金元素Co对Nd12.6Fe80.4-xCoxGa0.5Zr0.1B6.5合金磁性能的影响 | 赵康军，付 猛，连法增，陈志刚 | 金属功能材料 | 2008, 15(4): 1-4 |
| 161 | 锡含量对无取向硅钢薄带铁损和织构的影响 | 董 浩，赵 宇，喻晓军，连法增 | 金属功能材料 | 2008, 15(2): 5-9 |
| 162 | 实验室模拟CSP生产无取向电工钢板坯加热温度对磁性能的影响 | 孙 颖，李 军，赵 宇，喻晓军，连法增 | 金属功能材料 | 2008, 15(1): 5-7 |
| 163 | 锡含量对无取向硅钢薄带铁损和织构的影响 | 董 浩，赵 宇，喻晓军，连法增 | 电工钢 | 2008, 2: 15-17 |
| 164 | 形变对无取向硅钢冷轧织构的影响 | 张正贵，祝晓波，刘沿东，王 福，左 良 | 钢铁研究学报 | 2008, 20(5): 41-44 |
| 165 | 无锡钢板的产品特性及其国内外发展状况 | 王晓东，黄久贵，李建中，田彦文，刘常升 | 轧钢 | 2008, 25(4): 53-57 |
| 166 | 医用钛表面激光显微加工工艺参数的优化 | 张 松，胡金玲，王 强，张春华，刘常升 | 沈阳工业大学学报 | 2008, 30(4): 424-427 |
| 167 | 钛合金表面TiAlN膜层的制备 | 张春华，芦 伟，杨舒宇，张 松，张希川，刘常升 | 沈阳工业大学学报 | 2008, 30(5): 525-529 |
| 168 | 钛合金表面激光气体氮化及其HA复合涂层的制备 | 张春华，王 丹，张 松，王 强，张 扬，刘常升 | 沈阳工业大学学报 | 2008, 30(5): 653-657 |
| 169 | 多孔镍钛合金种植材料的体外生物安全性检测 | 张学鹏，刘 奕，修稚萌，孙旭东 | 空腔材料器械杂志 | 2008, 17(1): 17-19 |
| 170 | 强磁场对Fe-0.12C合金在顺磁居里温度以上先共析铁素体等温转变的影响 | 王守晶，赵 骧，左 良 | 中国材料科技与设备 | 2008, 5(1): 79-81 |
| 171 | 碳热还原法制备AlN超微粉工艺和材料研究 | 赵志江，林 生，孙旭东 | 材料导报 | 2008, 22(10): 121-321 |
| 172 | 涂层刀具的切削性能及其应用动态 | 赵时璐，张 钧，刘常升 | 材料导报 | 2008, 22(11): 62-65 |
| 173 | La2O2S电子结构及光学性质的第一原理研究 | 连景宝，李 星，肖 冰，李晓东，孙旭东 | 材料导报 | 2008, 22(8): 611-911 |
| 174 | 硫酸盐共沉淀法制备YAG粉体及透明陶瓷 | 吕光哲，孙旭东，修稚萌，倪爱伟 | 材料导报 | 2008, 22(8): 241-541 |
| 175 | 铝基非晶态合金的研究进展 | 杨红旺，佟伟平，赵 骧，左 良，王建强 | 材料导报 | 2008, 22(2): 46-48, 52 |
| 176 | 氯气浸出-电积工艺从铜渣中提取镍 | 薛文颖，申勇峰，赵宪明 | 有色金属 | 2008, 60(2): 77-79 |
| 177 | Y2O3/Ag复合材料的制备与性能 | 李凤华，林 琳，戴 民，单玉桥，樊占国 | 稀有金属材料与工程 | 2008, 37(s4): 202-205 |
| 178 | 用MOD法制备BaPbO3导电缓冲层 | 高 峰，王 娜，李凤华，戴 民，单玉桥 | 稀有金属材料与工程 | 2008, 37(s4): 206-209 |
| 179 | 2A97铝锂合金时效行为研究 | 袁志山，吴秀亮，陆 政，谢优华，戴圣龙，刘常升 | 稀有金属材料与工程 | 2008, 37(11): 1898-1902 |
| 180 | AA6061铝合金表面钛锆膜的结构及性能研究 | 王双红，刘常升，单凤君，齐国超 | 腐蚀科学与防护技术 | 2008, 20(6): 732-735 |